Industry News | 2015-02-02 17:59:06.0
Gen3 Systems Limited today announced that it will exhibit at the IPC APEX EXPO alongside its North American Distributor Ascentech LLC. Gen3 Systems will be present on Booth #1028 at the IPC APEX EXPO, scheduled to take place Feb. 24-26, 2015 at the San Diego Convention Center, San Diego, and will introduce new and improved products for electronics manufacturing at the trade show.
Technical Library | 2021-08-25 16:28:36.0
In this study, a Sn–Bi composite solder paste with thermosetting epoxy (TSEP Sn–Bi) was prepared by mixing Sn–Bi solder powder, flux, and epoxy system. The melting characteristics of the Sn–Bi solder alloy and the curing reaction of the epoxy system were measured by differential scanning calorimeter (DSC). A reflow profile was optimized based on the Sn–Bi reflow profile, and the Organic Solderability Preservative (OSP) Cu pad mounted 0603 chip resistor was chosen to reflow soldering and to prepare samples of the corresponding joint. The high temperature and humidity reliability of the solder joints at 85 #14;C/85% RH (Relative Humidity) for 1000 h and the thermal cycle reliability of the solder joints from
Effect of Soldering Parameters on Reaction Kinetics and Phase Transformations of SAC 305 Solder Effect of Soldering Parameters on Reaction Kinetics and Phase Transformations of SAC 305 Solder As technology becomes increasingly reliant
Blackfox Training Institute, LLC | https://www.blackfox.com/soldering/how-to-remove-oxidation-from-soldering-iron-tips/
) Apply flux cored solder on the oxidized tip. Once the flux is activated it starts a chemical reaction that removes the oxidation. Clean the tip with a brass wool or automatic tip cleaners Repeat the steps above until the tip is visibly clean If the tip is still not clean after this process, move on to the next step
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=5495
. In the electroless deposition of Pd on the electroless Ni-P film, the deposition processes involve a replacement reaction and ensuing reduction reaction